vindö 50 schaltplan

Hier gehts um Maschinen, Antriebe, Wellen, Elektrik und Elektronik (Navigationsgerät bitte unter Navigation)

Moderatoren: vindoede, Moderatoren

Antworten
duc in altum
Schiffsjunge
Schiffsjunge
Beiträge: 2
Registriert: Donnerstag 3. Dezember 2020, 11:55

vindö 50 schaltplan

Beitrag von duc in altum » Donnerstag 10. Dezember 2020, 12:29

Hello Vindö lovers,

Could anybody help me with a wiring diagram with legend for a vindö 50.
It would help a lot to sort things out.

Kind regards,

Wim

Mats
G Punkt
G Punkt
Beiträge: 321
Registriert: Donnerstag 28. Oktober 2004, 18:41

Re: vindö 50 schaltplan

Beitrag von Mats » Freitag 11. Dezember 2020, 00:28

Good day Wim, unfortunately there are no wiring diagramms for our boats. So you must follow them through the boat till the end. But there are not so much, so you will have success. Probably you will recognize, that it will be the best to renew most of them and to choose new better cable ways. At the end you may dicide to install a new switchboard ready for new technic. So I did it over the years.

Good luck
Mats
V 50 Ketsch

duc in altum
Schiffsjunge
Schiffsjunge
Beiträge: 2
Registriert: Donnerstag 3. Dezember 2020, 11:55

Re: vindö 50 schaltplan

Beitrag von duc in altum » Samstag 12. Dezember 2020, 00:45

Thank you Mats for the reply. I had hoped that some consistency was used in the numbering.
What Vindö originally installed was not so bad for its time.
It is what previous owners added/changed in those 40 years that made it a bit a mess.

Kind regards,

Wim

Benutzeravatar
Saltkrokan
Ruderer
Ruderer
Beiträge: 15
Registriert: Dienstag 17. November 2020, 07:48
Wohnort: 69493 Hirschberg

Re: vindö 50 schaltplan

Beitrag von Saltkrokan » Dienstag 18. Mai 2021, 19:27

Hello Wim,

I am late with my answer. But perhaps this can help.
I found this two plans on my Vindö 50.

The connections to the devices are now completely changed, but the the way from the battery to the switch panel and the measure instruments stayed in place.

I for myself will remove everything and rebuild the whole system new. Then I know where everything is.
I will have new cables in the correct thickness and leading through cable canals.
Schaltplan 2.jpg
Schaltplan 2.jpg (179.39 KiB) 3952 mal betrachtet
Schaltplan 1.jpg
Schaltplan 1.jpg (151.58 KiB) 3952 mal betrachtet
Kind regards

Andreas
Seglerische Grüsse

Andreas

Vindö 50 SL Baunr. S1159, Segelnr. 202(?) Saltkrokan ex Pramod

Antworten